WriteStream ma’lumotnomasi

const fs = require('fs');
const path = require('path');

// Define the output file path
const outputFile = path.join(__dirname, 'writestream-example.txt');

// Create a WriteStream to write to the file
const writeStream = fs.createWriteStream(outputFile, {
  // Options
  flags: 'w',          // 'w' for write (overwrites existing file)
  encoding: 'utf8',    // Set the encoding for strings
  mode: 0o666,         // File mode (permissions)
  autoClose: true      // Automatically close the file descriptor when the stream ends
});

console.log('File WriteStream properties:');
console.log(`- Path: ${writeStream.path}`);
console.log(`- Pending: ${writeStream.pending}`);
console.log(`- High Water Mark: ${writeStream.writableHighWaterMark} bytes`);

// Handle stream events
writeStream.on('open', (fd) => {
  console.log(`File opened with descriptor: ${fd}`);
});

writeStream.on('ready', () => {
  console.log('WriteStream is ready');
  
  // Write data to the stream
  writeStream.write('Hello, this is the first line.\n');
  writeStream.write('This is the second line.\n');
  writeStream.write('And this is the third line.\n');
  
  // End the stream after writing all data
  writeStream.end('This is the final line.\n', () => {
    console.log('Finished writing to the file');
    console.log(`Total bytes written: ${writeStream.bytesWritten}`);
  });
});

// Handle drain event (when buffer is empty)
writeStream.on('drain', () => {
  console.log('Write buffer drained');
});

// Handle finish event (after end() and all data is flushed)
writeStream.on('finish', () => {
  console.log('All writes have been completed');
  
  // Read back the file contents to verify
  fs.readFile(outputFile, 'utf8', (err, data) => {
    if (err) {
      console.error(`Error reading file: ${err.message}`);
      return;
    }
    
    console.log('\nFile content:');
    console.log('-'.repeat(20));
    console.log(data);
    console.log('-'.repeat(20));
    
    // Clean up the sample file
    fs.unlink(outputFile, (err) => {
      if (err) {
        console.error(`Error removing file: ${err.message}`);
        return;
      }
      console.log('Sample file removed');
    });
  });
});

writeStream.on('close', () => {
  console.log('Stream closed');
});

writeStream.on('error', (err) => {
  console.error(`Error: ${err.message}`);
});

const fs = require('fs');
const path = require('path');

// Define the output file path
const backpressureFile = path.join(__dirname, 'backpressure-example.txt');

// Create a WriteStream with a small highWaterMark to demonstrate backpressure
const writeStream = fs.createWriteStream(backpressureFile, {
  highWaterMark: 1024 // 1KB buffer (small to demonstrate backpressure)
});

// Counter for how many chunks we've written
let chunksWritten = 0;
let drainEvents = 0;

// Function to write data until backpressure occurs
function writeChunks() {
  console.log('Writing chunks...');
  
  // Create a large chunk of data
  const chunk = 'a'.repeat(256); // 256 bytes per chunk
  
  // Try to write many chunks
  let canContinue = true;
  
  while (canContinue && chunksWritten < 100) {
    // Attempt to write the chunk
    canContinue = writeStream.write(`Chunk ${chunksWritten}: ${chunk}\n`);
    chunksWritten++;
    
    if (chunksWritten % 10 === 0) {
      console.log(`Wrote ${chunksWritten} chunks so far`);
    }
    
    // If canContinue is false, we hit backpressure
    if (!canContinue) {
      console.log(`Backpressure hit after ${chunksWritten} chunks. Waiting for drain...`);
      
      // Wait for the drain event before continuing
      writeStream.once('drain', () => {
        drainEvents++;
        console.log(`Drain event #${drainEvents} occurred. Resuming writes...`);
        writeChunks(); // Continue writing
      });
    }
  }
  
  // If we've written all chunks, end the stream
  if (chunksWritten >= 100) {
    writeStream.end('\nAll chunks have been written.\n', () => {
      console.log('Ended the WriteStream after writing all chunks');
    });
  }
}

// Start writing chunks when the stream is ready
writeStream.on('ready', () => {
  console.log('WriteStream is ready with highWaterMark =',
    writeStream.writableHighWaterMark, 'bytes');
  
  // Start writing chunks
  writeChunks();
});

// Handle finish event
writeStream.on('finish', () => {
  console.log('\nWrite operation completed');
  console.log(`Total chunks written: ${chunksWritten}`);
  console.log(`Total drain events: ${drainEvents}`);
  console.log(`Total bytes written: ${writeStream.bytesWritten}`);
  
  // Clean up the sample file
  fs.unlink(backpressureFile, (err) => {
    if (err) {
      console.error(`Error removing file: ${err.message}`);
      return;
    }
    console.log('Sample file removed');
  });
});

// Handle errors
writeStream.on('error', (err) => {
  console.error(`Error: ${err.message}`);
});

const fs = require('fs');
const path = require('path');

// Define the output file paths
const uncorkedFile = path.join(__dirname, 'uncorked-example.txt');
const corkedFile = path.join(__dirname, 'corked-example.txt');

// Function to run the demonstration
function demonstrateCorkUncork() {
  console.log('Demonstrating cork() and uncork() methods');
  
  // 1. Write without corking
  const uncorkedStream = fs.createWriteStream(uncorkedFile);
  
  uncorkedStream.on('finish', () => {
    console.log(`Uncorked stream finished. Bytes written: ${uncorkedStream.bytesWritten}`);
    
    // 2. Now write with corking
    const corkedStream = fs.createWriteStream(corkedFile);
    
    corkedStream.on('finish', () => {
      console.log(`Corked stream finished. Bytes written: ${corkedStream.bytesWritten}`);
      
      // Compare files
      fs.readFile(uncorkedFile, 'utf8', (err, uncorkedData) => {
        if (err) {
          console.error(`Error reading uncorked file: ${err.message}`);
          return;
        }
        
        fs.readFile(corkedFile, 'utf8', (err, corkedData) => {
          if (err) {
            console.error(`Error reading corked file: ${err.message}`);
            return;
          }
          
          console.log('\nFile comparison:');
          console.log(`- Uncorked file size: ${uncorkedData.length} bytes`);
          console.log(`- Corked file size: ${corkedData.length} bytes`);
          console.log(`- Content identical: ${uncorkedData === corkedData}`);
          
          // Clean up sample files
          fs.unlinkSync(uncorkedFile);
          fs.unlinkSync(corkedFile);
          console.log('Sample files removed');
        });
      });
    });
    
    // Start cork operation
    console.log('Writing with cork()...');
    corkedStream.cork();
    
    // Write multiple chunks of data
    for (let i = 0; i < 1000; i++) {
      corkedStream.write(`Line ${i}: This data is being corked.\n`);
    }
    
    // Uncork to flush the buffer - in real applications, you might cork/uncork
    // multiple times to batch writes together
    corkedStream.uncork();
    
    // End the stream
    corkedStream.end();
  });
  
  // Write without corking
  console.log('Writing without cork()...');
  for (let i = 0; i < 1000; i++) {
    uncorkedStream.write(`Line ${i}: This data is not being corked.\n`);
  }
  
  // End the stream
  uncorkedStream.end();
}

// Run the demonstration
demonstrateCorkUncork();

// process.stdout is a WriteStream

// Basic writing to stdout
process.stdout.write('Hello, ');
process.stdout.write('world!\n');

// Check if stdout supports color (most terminals do)
const supportsColor = process.stdout.hasColors && process.stdout.hasColors();

// Simple formatting if color is supported
if (supportsColor) {
  // ANSI escape codes for colors
  const colors = {
    red: '\x1b[31m',
    green: '\x1b[32m',
    yellow: '\x1b[33m',
    blue: '\x1b[34m',
    reset: '\x1b[0m'
  };
  
  process.stdout.write(`${colors.red}This text is red.\n${colors.reset}`);
  process.stdout.write(`${colors.green}This text is green.\n${colors.reset}`);
  process.stdout.write(`${colors.blue}This text is blue.\n${colors.reset}`);
} else {
  process.stdout.write('Your terminal does not support colors.\n');
}

// Writing tabular data
const table = [
  ['Name', 'Age', 'Country'],
  ['John', '28', 'USA'],
  ['Maria', '32', 'Spain'],
  ['Yuki', '24', 'Japan']
];

process.stdout.write('\nTable Example:\n');
table.forEach(row => {
  process.stdout.write(`${row[0].padEnd(10)}${row[1].padEnd(5)}${row[2]}\n`);
});

// Progress bar example
process.stdout.write('\nProgress Bar Example:\n');

function showProgress(percent) {
  const width = 40;
  const completed = Math.floor(width * (percent / 100));
  const remaining = width - completed;
  
  // Create the progress bar
  const bar = '[' + '#'.repeat(completed) + ' '.repeat(remaining) + ']';
  
  // Use \r to return to the beginning of the line
  process.stdout.write(`\r${bar} ${percent}%`);
  
  // When complete, add a newline
  if (percent === 100) {
    process.stdout.write('\nComplete!\n');
  }
}

// Simulate progress
let progress = 0;
const progressInterval = setInterval(() => {
  progress += 10;
  showProgress(progress);
  
  if (progress >= 100) {
    clearInterval(progressInterval);
  }
}, 300);

// Note: The progress bar example is more effective in a terminal
// than in the W3Schools TryIt editor

const http = require('http');

// Create an HTTP server
const server = http.createServer((req, res) => {
  // res is an http.ServerResponse, which is a WriteStream
  console.log(`Received ${req.method} request to ${req.url}`);
  
  // Set response headers
  res.setHeader('Content-Type', 'text/html');
  
  // Check if the client requested a streaming response
  if (req.url === '/stream') {
    // Demonstrate streaming a large response
    streamLargeResponse(res);
  } else {
    // Default handler - show links to examples
    res.writeHead(200, {'Content-Type': 'text/html'});
    res.end(`
      <!DOCTYPE html>
      <html>
      <head><title>HTTP WriteStream Example</title></head>
      <body>
        <h1>HTTP WriteStream Examples</h1>
        <ul>
          <li><a href="/stream">Stream a large response</a></li>
        </ul>
      </body>
      </html>
    `);
  }
});

// Function to stream a large response piece by piece
function streamLargeResponse(res) {
  // Set appropriate headers
  res.writeHead(200, {
    'Content-Type': 'text/html',
    'Transfer-Encoding': 'chunked'  // Enable chunked transfer encoding
  });
  
  // Write the HTML header
  res.write(`
    <!DOCTYPE html>
    <html>
    <head>
      <title>Streaming Response Example</title>
      <style>
        body { font-family: Arial, sans-serif; margin: 20px; }
        .chunk { padding: 10px; margin: 5px; background-color: #f0f0f0; }
      </style>
    </head>
    <body>
      <h1>Streaming Response Example</h1>
      <p>This response is being streamed in chunks with delays between them.</p>
      <div id="chunks">
  `);
  
  // Number of chunks to send
  const totalChunks = 10;
  let sentChunks = 0;
  
  // Function to send a chunk
  function sendChunk() {
    sentChunks++;
    
    const now = new Date().toISOString();
    const chunk = `
      <div class="chunk">
        <h3>Chunk ${sentChunks} of ${totalChunks}</h3>
        <p>Sent at: ${now}</p>
        <p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nullam vehicula magna eros,
        eget gravida dolor fermentum non.</p>
      </div>
    `;
    
    // Write the chunk to the response
    res.write(chunk);
    
    // If we've sent all chunks, end the response
    if (sentChunks >= totalChunks) {
      // Write HTML footer
      res.end(`
        </div>
        <p>All chunks have been sent.</p>
      </body>
      </html>
      `);
      console.log('Finished streaming response');
    } else {
      // Otherwise, schedule the next chunk
      setTimeout(sendChunk, 500); // Send a chunk every 500ms
    }
  }
  
  // Start sending chunks
  console.log('Starting to stream response');
  sendChunk();
}

// Start the server
const PORT = 8080;
server.listen(PORT, () => {
  console.log(`HTTP WriteStream example server running at http://localhost:${PORT}`);
});

// Note: To see this in action, you need to run the server and open the browser at
// http://localhost:8080

const fs = require('fs');
const path = require('path');

// Function to write to a file with proper error handling
function writeWithErrorHandling(filePath, data) {
  console.log(`Attempting to write to: ${filePath}`);
  
  // Create the WriteStream
  const writeStream = fs.createWriteStream(filePath);
  
  // Set up promise to capture result or error
  return new Promise((resolve, reject) => {
    // Handle errors
    writeStream.on('error', (err) => {
      console.error(`Error writing to ${filePath}: ${err.message}`);
      
      // Make sure the stream is destroyed properly
      writeStream.destroy();
      reject(err);
    });
    
    // Handle successful completion
    writeStream.on('finish', () => {
      console.log(`Successfully wrote ${writeStream.bytesWritten} bytes to ${filePath}`);
      resolve(writeStream.bytesWritten);
    });
    
    // Write the data
    writeStream.write(data, (err) => {
      if (err) {
        console.error(`Error during write operation: ${err.message}`);
        // The 'error' event will also be emitted in this case
      } else {
        console.log('Data written successfully, ending stream');
        writeStream.end();
      }
    });
  });
}

// Test with valid and invalid file paths
const validPath = path.join(__dirname, 'valid-path.txt');
const invalidPath = path.join('/', 'invalid', 'path', 'file.txt'); // Likely to be invalid on most systems

// Example 1: Writing to a valid path
console.log('Example 1: Writing to a valid path');
writeWithErrorHandling(validPath, 'This is test content for error handling example')
  .then(bytesWritten => {
    console.log(`Verified: ${bytesWritten} bytes written`);
    
    // Clean up the test file
    fs.unlinkSync(validPath);
    console.log('Test file removed');
    
    // Example 2: Writing to an invalid path
    console.log('\nExample 2: Writing to an invalid path');
    return writeWithErrorHandling(invalidPath, 'This should fail');
  })
  .catch(err => {
    console.log('Error caught in Promise catch:', err.message);
  });

// Example 3: Demonstrating destroyed streams
console.log('\nExample 3: Demonstrating destroyed streams');

function demonstrateDestroyedStream() {
  const destroyTestFile = path.join(__dirname, 'destroy-test.txt');
  const writeStream = fs.createWriteStream(destroyTestFile);
  
  writeStream.on('error', (err) => {
    console.error(`Destruction error: ${err.message}`);
  });
  
  writeStream.on('close', () => {
    console.log('Destroyed stream closed');
    
    // Clean up if the file was created
    if (fs.existsSync(destroyTestFile)) {
      fs.unlinkSync(destroyTestFile);
      console.log('Destroy test file removed');
    }
  });
  
  // Write some data
  writeStream.write('Initial data before destruction\n');
  
  // Destroy the stream with an error
  console.log('Deliberately destroying the stream');
  writeStream.destroy(new Error('Stream manually destroyed'));
  
  // Attempt to write after destruction (should fail silently)
  const writeResult = writeStream.write('This should not be written');
  console.log(`Attempt to write after destruction returned: ${writeResult}`);
}

demonstrateDestroyedStream();